Martin AleXander Walschik
2005-09-06 10:13:15 UTC
Hi List,
i have here a mysterious VisionPlus from Twinhand in the usb-version. It
has the same tuning-problem like the
PCI version which is described here:
http://www.linuxtv.org/pipermail/linux-dvb/2005-May/001802.html
The device looks like the magicbox from here:
http://www.twinhan.com/product_terrestrial_5.asp
But under the label "magicbox" (a sticker) i can read VisionPlus.
Usbview identify the device as VP7041:
------------------------------------------------------------------------
VP7041
Manufacturer: TwinHan
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 1822
Product Id: 3202
Revision Number: 0.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 500mA
Interface Number: 0
Name: dvb_usb_dibusb_mb
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 4
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 83
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
------------------------------------------------------------------------
I use kernel 2.6.13 with an the dvb-kernel from yesterday.
This log ist returned after "./insmod load"
------------------------------------------------------------------------
Sep 6 11:58:41 lxnote kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 2
Sep 6 11:58:51 lxnote kernel: Linux video capture interface: v1.00
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget_ci dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget_av'.
Sep 6 11:58:53 lxnote kernel: usbcore: registered new driver ttusb
Sep 6 11:58:53 lxnote kernel: usbcore: registered new driver ttusb-dec
Sep 6 11:58:54 lxnote kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III
digital TV receiver chip loaded successfully
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver
b2c2_flexcop_usb
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver cinergyT2
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver dvb_usb_vp7045
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver
dvb_usb_dtt200u
Sep 6 11:58:54 lxnote kernel: dvb-usb: found a 'TwinhanDTV USB-Ter
USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try
to load a firmware
Sep 6 11:58:55 lxnote kernel: dvb-usb: downloading firmware from file
'dvb-usb-dibusb-5.0.0.11.fw' to the 'Cypress AN2135'
Sep 6 11:58:55 lxnote kernel: dvb-usb: TwinhanDTV USB-Ter USB1.1 /
Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and
connected.
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_dibusb_mb
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_dibusb_mc
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_a800
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_nova_t_usb2
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_umt_010
Sep 6 11:58:55 lxnote kernel: usb 1-2: USB disconnect, address 2
Sep 6 11:58:55 lxnote kernel: dvb-usb: generic DVB-USB module
successfully deinitialized and disconnected.
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_digitv
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_cxusb
Sep 6 11:58:57 lxnote kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 3
Sep 6 11:58:57 lxnote kernel: dvb-usb: found a 'TwinhanDTV USB-Ter
USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
Sep 6 11:58:57 lxnote kernel: dvb-usb: will use the device's hardware
PID filter (table count: 16).
Sep 6 11:58:57 lxnote kernel: DVB: registering new adapter (TwinhanDTV
USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device).
Sep 6 11:58:57 lxnote kernel: DVB: registering frontend 0 (DiBcom
3000M-B DVB-T)...
Sep 6 11:58:57 lxnote kernel: dibusb: this device has the Thomson Cable
onboard. Which is default.
Sep 6 11:58:57 lxnote kernel: dvb-usb: schedule remote query interval
to 150 msecs.
Sep 6 11:58:57 lxnote kernel: dvb-usb: TwinhanDTV USB-Ter USB1.1 /
Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and
connected.
------------------------------------------------------------------------
The firmware file is 'dvb-usb-dibusb-5.0.0.11.fw', the correct one for
the MagicBox1. but the line identify my device as 'Cypress AN2135'?
If i try the scan the frequenzy the "scan" program from dvb-apps returns:
------------------------------------------------------------------------
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 482000000 0 2 0 1 1 2 0
initial transponder 538000000 0 2 0 1 1 2 0
initial transponder 562000000 0 2 0 1 1 2 0
initial transponder 642000000 0 2 0 1 1 2 0
initial transponder 666000000 0 2 0 1 1 2 0
initial transponder 698000000 0 2 0 1 1 2 0
initial transponder 746000000 0 2 0 1 1 2 0
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
------------------------------------------------------------------------
on every transponder.
The same happends with kaffeine scanfunction.
If i try the device under win2k with the same antenna it receive 21
channels, so the antenna is not the problem.
Can anyone help here?
regards
AleX
i have here a mysterious VisionPlus from Twinhand in the usb-version. It
has the same tuning-problem like the
PCI version which is described here:
http://www.linuxtv.org/pipermail/linux-dvb/2005-May/001802.html
The device looks like the magicbox from here:
http://www.twinhan.com/product_terrestrial_5.asp
But under the label "magicbox" (a sticker) i can read VisionPlus.
Usbview identify the device as VP7041:
------------------------------------------------------------------------
VP7041
Manufacturer: TwinHan
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 1822
Product Id: 3202
Revision Number: 0.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 500mA
Interface Number: 0
Name: dvb_usb_dibusb_mb
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 4
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 83
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
------------------------------------------------------------------------
I use kernel 2.6.13 with an the dvb-kernel from yesterday.
This log ist returned after "./insmod load"
------------------------------------------------------------------------
Sep 6 11:58:41 lxnote kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 2
Sep 6 11:58:51 lxnote kernel: Linux video capture interface: v1.00
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget_ci dvb'.
Sep 6 11:58:53 lxnote kernel: saa7146: register extension 'budget_av'.
Sep 6 11:58:53 lxnote kernel: usbcore: registered new driver ttusb
Sep 6 11:58:53 lxnote kernel: usbcore: registered new driver ttusb-dec
Sep 6 11:58:54 lxnote kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III
digital TV receiver chip loaded successfully
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver
b2c2_flexcop_usb
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver cinergyT2
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver dvb_usb_vp7045
Sep 6 11:58:54 lxnote kernel: usbcore: registered new driver
dvb_usb_dtt200u
Sep 6 11:58:54 lxnote kernel: dvb-usb: found a 'TwinhanDTV USB-Ter
USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try
to load a firmware
Sep 6 11:58:55 lxnote kernel: dvb-usb: downloading firmware from file
'dvb-usb-dibusb-5.0.0.11.fw' to the 'Cypress AN2135'
Sep 6 11:58:55 lxnote kernel: dvb-usb: TwinhanDTV USB-Ter USB1.1 /
Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and
connected.
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_dibusb_mb
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_dibusb_mc
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_a800
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_nova_t_usb2
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver
dvb_usb_umt_010
Sep 6 11:58:55 lxnote kernel: usb 1-2: USB disconnect, address 2
Sep 6 11:58:55 lxnote kernel: dvb-usb: generic DVB-USB module
successfully deinitialized and disconnected.
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_digitv
Sep 6 11:58:55 lxnote kernel: usbcore: registered new driver dvb_usb_cxusb
Sep 6 11:58:57 lxnote kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 3
Sep 6 11:58:57 lxnote kernel: dvb-usb: found a 'TwinhanDTV USB-Ter
USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
Sep 6 11:58:57 lxnote kernel: dvb-usb: will use the device's hardware
PID filter (table count: 16).
Sep 6 11:58:57 lxnote kernel: DVB: registering new adapter (TwinhanDTV
USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device).
Sep 6 11:58:57 lxnote kernel: DVB: registering frontend 0 (DiBcom
3000M-B DVB-T)...
Sep 6 11:58:57 lxnote kernel: dibusb: this device has the Thomson Cable
onboard. Which is default.
Sep 6 11:58:57 lxnote kernel: dvb-usb: schedule remote query interval
to 150 msecs.
Sep 6 11:58:57 lxnote kernel: dvb-usb: TwinhanDTV USB-Ter USB1.1 /
Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and
connected.
------------------------------------------------------------------------
The firmware file is 'dvb-usb-dibusb-5.0.0.11.fw', the correct one for
the MagicBox1. but the line identify my device as 'Cypress AN2135'?
If i try the scan the frequenzy the "scan" program from dvb-apps returns:
------------------------------------------------------------------------
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 482000000 0 2 0 1 1 2 0
initial transponder 538000000 0 2 0 1 1 2 0
initial transponder 562000000 0 2 0 1 1 2 0
initial transponder 642000000 0 2 0 1 1 2 0
initial transponder 666000000 0 2 0 1 1 2 0
initial transponder 698000000 0 2 0 1 1 2 0
initial transponder 746000000 0 2 0 1 1 2 0
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
------------------------------------------------------------------------
on every transponder.
The same happends with kaffeine scanfunction.
If i try the device under win2k with the same antenna it receive 21
channels, so the antenna is not the problem.
Can anyone help here?
regards
AleX